All You Need to Know About Tyre

Tyres fitted in any car have a lot to withstand to provide comfort to the passengers on board. It could be passing through uneven roads, potholes, or stony tracks. Being the only point of contact with the road, tyres require a lot of maintenance as they are constantly subjected to a lot of stress.

To enhance their performance, they need to be replaced from time to time. Unlike in the case of changing a wheel, the tyres should not be mounted on the rims by you. Tyre specialists or mechanics are aware of the art of changing the tyres to make sure all is in place.

Usually, the experts use a professional tyre changer for removing and mounting the tyres back onto the rim. are changed and fitted with a mounting arm and a bead breaker.

The process of mounting

• At first, the size and age of the tyre should be checked.
  

• The tyre specialist coats the tyre beads inside and outside with a tyre mounting grease or paste to make the pulling on the tyre easy.
  

• The rims are then clamped on the mounting machine, which then uses the mounting arm to position the lower flank of the tyre on the upper edge of the rim.
  

• The machine is then rotated to pull the tyre onto the rim.
  

• This process is repeated by the specialist for the upper flank of the tyre as well.
  

• The tyre is simultaneously pressed under the rim to ensure the tyre would be seated later on.
  

• The tyre is then filled with air so that the beads of the tyre press against the rim. This prevents the escape of any air from the tyre.
  

• The tyre should be filled with the vehicle’s desired tyre pressure before shutting its valve.
  

Post this process of mounting the tyre; small balancing weights are fitted on the rims. This is done to compensate for any possible tyre imbalance, preventing steering wheel vibrations, increasing the mileage, and uplifting the driving experience. Hence, the balancing of tyres becomes extremely essential.

When is it ideal for changing the tyres of your car?

If the tyres of your car wear down to the minimum tread depth of 1.6 millimetres or even below this,it is a clear indication of the wearing out of the old rubber. Your tyre is in need to be changed at this point. You would require contacting a specialist to replace and mount the new tyre. This may not mean that you need to change the complete wheel. Researches have suggested that frequent mounting and dismounting of tyres leads to straining the rubber and rim. This also affects the service life of the Tyres High Wycombe; hence, it is advisable to take your vehicle to an expert tyre fitter every time.

You could visit our experts, at Top Tread Tyres, working in this field for a long time to help you understand the logic behind tyre fittings. We also provide top-notch Tyres, that will help you get back to the road safely.